分享

 当前位置:首页 > 供求信息

供求信息
  • Name:TC Gauge VCR

    P/N:8112105

    P/N:Ni-4-VCR-2-GR

    PurposeFor use with the On-Board TC Gauge Kit (CTI-CRYOGENICS Kit No.8080015K003).Kit Contents1. Close the Hi-Vac valve in your vacuum system.2. Follow the regeneration process described in your On-Board cryopumpinstallation, operation and servicing instructi** to warm up the pump. Then,stop the regeneration when the cryopump is warm and turn off the system powerswitches.3. Disconnect the controller input power cable connector from the facility poweroutlet.4. Disconnect the Electrical On-Board power cable from the cryopump beforeremoving the TC gauge.5. Disconnect the TC plug from the TC gauge. See Figure 1.6. Remove the TC gauge from the On-Board cryopump by holding the TC gaugetee fitting with a 5/8" wrench and using a 3/4" wrench loosen and remove the TCgauge and copper gasket. Discard the TC gauge and copper gasket.7. Install the replacement TC gauge (Item 1) and copper gasket (Item 2) suppliedwith the kit on the cryopump, using 3/4" and 5/8" wrenches.8. Reconnect the TC gauge electrical plug to the TC gauge.9. Reconnect the electrical power cables which were disconnected in Step (3) and(4).Item Number Description Quantity1 TC Gauge Assembly 12 Gasket, Copper 13 Instruction Sheet (No. 8040238) 18040238 Rev. -- (5/91)2Refer to your Installation, Operation and Servicing Instructi** for your On-Boardcryopump and check for proper operation of the TC gauge.


  • ULVAC Cryogenics CRYO-U High Vacuum Pump w/ R10/R20 Refrigerator

    34 cryopumps with heater blankets available in stock!


  • Pfeiffer Hicube 300 Classic Vacuum Turbo Pump Controller PM S23 220 00


  • HBL2431S

    By Hubbell Wiring Device-Kellems   
    Catalog ID: HBL2431S
    Locking Devices, Twist-Lock®, Safety Shroud, Male Plug, 20A 3-Phas Delta 480V AC, 3-Pole 4-Wire Grounding, L16-20P, Screw Terminal, Black and White


  • Pfeiffer Vacuum HiCube 300 Classic w. MVP 70, PM S23 250 00 


1页5条 跳转 GO

上移

下移

上移

下移

上移

下移

深圳市市场监督管理局企业主体身份公示